| Customization: | Available |
|---|---|
| Coating: | Coating |
| Structure: | Integral |
|
Still deciding? Get samples of US$ 5/Piece
Order Sample
|
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Product Information
| Order No. | D1 | L1 | F(Flute) | D | AL |
|
H-EM-1.0
|
1.0 | 3 | 4F | 4D | 50 |
|
H-EM-1.5
|
1.5 | 4 | 4F | 4D | 50 |
|
H-EM-2.0
|
2.0 | 6 | 4F | 4D | 50 |
|
H-EM-2.5
|
2.5 | 8 | 4F | 4D | 50 |
|
H-EM-3.0
|
3.0 | 8 | 4F | 4D | 50 |
|
H-EM-4.0
|
4.0 | 11 | 4F | 4D | 50 |
|
H-EM-5.0
|
5.0 | 13 | 4F | 6D | 50 |
|
H-EM-6.0
|
6.0 | 16 | 4F | 6D | 50 |
|
H-EM-8.0
|
8.0 | 20 | 4F | 8D | 60 |
|
H-EM-10.0
|
10.0 | 25 | 4F | 10D | 75 |
|
H-EM-12.0
|
12.0 | 30 | 4F | 12D | 75 |
|
H-EM-14.0
|
14.0 | 35 | 4F | 14D | 80 |
|
H-EM-16.0
|
16.0 | 36 | 4F | 16D | 100 |
|
H-EM-18.0
|
18.0 | 38 | 4F | 18D | 100 |
|
H-EM-20.0
|
20.0 | 45 | 4F | 20D | 100 |
Applicable materials:HRC50-68,pre hardened steel, hardened steel, cast iron, ductile iron, etc
Detailed Photo
H Series Ball Nose End Mills
| Order No. | D1 | R | L1 | F(Flute) | D | AL |
|
H-BN-1.0
|
1.0 | R0.5 | 2 | 2F | 4D | 50 |
|
H-BN-1.5
|
1.5 | R0.75 | 2 | 2F | 4D | 50 |
|
H-BN-2.0
|
2.0 | R1.0 | 4 | 2F | 4D | 50 |
|
H-BN-3.0
|
3.0 | R1.5 | 6 | 2F | 4D | 50 |
|
H-BN-4.0
|
4.0 | R2.0 | 8 | 2F | 4D | 50 |
|
H-BN-5.0
|
5.0 | R2.5 | 10 | 2F | 6D | 50 |
|
H-BN-6.0
|
6.0 | R3.0 | 12 | 2F | 6D | 50 |
|
H-BN-8.0
|
8.0 | R4.0 | 16 | 2F | 8D | 60 |
|
H-BN-10.0
|
10.0 | R5.0 | 20 | 2F | 10D | 75 |
|
H-BN-12.0
|
12.0 | R6.0 | 24 | 2F | 12D | 75 |
|
H-BN-14.0
|
14.0 | R7.0 | 28 | 2F | 14D | 80 |
|
H-BN-16.0
|
16.0 | R8.0 | 32 | 2F | 16D | 100 |
|
H-BN-18.0
|
18.0 | R9.0 | 36 | 2F | 18D | 100 |
|
H-BN-20.0
|
20.0 | R10.0 | 40 | 2F | 20D | 100 |
H Series Corner Radius End Mills
| Order No. | D1 | R | L1 | F(Flute) | D | AL |
|
H-CR-1.0
|
1.0 | R0.2 | 3 | 4F | 4D | 50 |
|
H-CR-2.0
|
2.0 | R0.2-R0.5 | 6 | 4F | 4D | 50 |
|
H-CR-3.0
|
3.0 | R0.2-R0.5 | 8 | 4F | 4D | 50 |
|
H-CR-4.0
|
4.0 | R0.2-R0.5 | 11 | 4F | 4D | 50 |
|
H-CR-5.0
|
5.0 | R0.2-R0.5 | 13 | 4F | 6D | 50 |
|
H-CR-6.0
|
6.0 | R0.2-R0.5 | 16 | 4F | 6D | 50 |
|
H-CR-8.0
|
8.0 | R0.2-R1.0 | 20 | 4F | 8D | 60 |
|
H-CR-10.0
|
10.0 | R0.2-R3.0 | 25 | 4F | 10D | 75 |
|
H-CR-12.0
|
12.0 | R0.2-R3.0 | 30 | 4F | 12D | 75 |
|
H-CR-14.0
|
14.0 | R0.5-R3.0 | 35 | 4F | 14D | 80 |
|
H-CR-16.0
|
16.0 | R0.5-R3.0 | 36 | 4F | 16D | 100 |
|
H-CR-18.0
|
18.0 | R0.5-R3.0 | 38 | 4F | 18D | 100 |
|
H-CR-20.0
|
20.0 | R0.5-R3.0 | 45 | 4F | 20D | 100 |
Different Series of Carbide Milling Cutters
| Series | Suitable Processing Materials | Features |
| G | ≤HRC 45 Steel, cast iron, carbon steel, alloy steel, pre hardened steel, hardened steel, cast iron, ductile iron, etc. | Swiss nano coating,wear-resistant, high temperature resistant, widely used, cost-effective. |
| P | ≤HRC55,nonferrous alloy, steel, pre hardened steel, quenched and tempered steel, stainless steel and other materials. | High precision and high surface quality |
| H | HRC50-68,pre hardened steel, hardened steel, cast iron, ductile iron, etc. | Antique copper dot matrix heterogeneous coating,higher coating hardness and excellent high temperature oxidation resistance |
| FSUS | stainless steel SUS303, SUS304, SUS316L, etc. (<280HB) | Special surface post-treatment can effectively reduce friction, discharge chips more smoothly, and the quality of machined surface is better |
| FAL | aluminum alloy AL5052, AL6063, AL6061, AL7075, etc; General processing of aluminum alloy (Si ≤ 12%) and copper alloy (<200HB) | The special cutting edge design effectively prevents vibration and solves the problem of chip sticking on the cutting edge; Water cooling is the best cooling method. |
More Products
FAQ
Q1: Are you a factory or trading company?
A1: We are professional manufacturer,have more than 14 years experience in this industry. Welcome to visit us!
Q2: Do you produce special cutting tools?
A2: Yes, we provide OEM/ODM service for customers, just send us your design drawings if you have any customized items need
to be made.
Q3: Do you accept low volume for sample order? And what's your MOQ for special tools?
A3: Yes, our MOQ is 1 piece, and the sample lead time is 3 days. It can be negotiated for special requirement.
Q4: If we want to work with you, is it possible to get confidentiality?
A4: Sure, all your information including company info, drawings, PO details will be kept confidential, we can signed non-disclosure agreement.
Q5: How long of the lead time?
A5: for standrad items we have in stock, the lead time is within 3 days.
for non-standrad items need to be customized made, the lead time is within 7-15 days.
Q6: Is free shipping possible?
A6: We don't offer free shipping service,but we will give you some discount if you buy large quantity products.
We have discount on shipping cost from our courier companies,can offer you the cheapst shipping cost.
){kind=link}